JP3D.FAB Interchangeable 2" Hitch Display System – Starter Kit
TOOL-FREE · INTERCHANGEABLE · 2-INCH RECEIVER
JP3D.FAB Interchangeable 2" Hitch Display System – Starter Kit
Swap the plate. Keep the hitch.
The Falcons emblem turns left while installed, thanks to its built-in one-way ratchet. No tools. No disassembly.
Exclusive to this Falcons item. Other interchangeable plates are fixed and do not rotate.
Decorative use only. Not for towing or load-bearing use. Designed for standard 2-inch receivers; verify dimensions and clearance before ordering.
Details that matter.
Swap the plate. Keep the hitch.
The JP3D.FAB Interchangeable Hitch Display System is a modular, toolless 3D-printed hitch display built around a removable display plate. The plate is captured between two holder halves, then the locking sleeve slides over the assembly to secure everything together. The complete unit installs in a standard 2-inch receiver using the included JP3D.FAB retaining pin.
What makes this version different
- Built-in one-way ratchet: the Falcons emblem rotates to the left while the hitch is still installed. No tools, no disassembly, and no need to remove the hitch from the receiver.
- Ratchet feature is exclusive to this item: other interchangeable plates are fixed in position and do not rotate.
- Toolless plate changes: swap interchangeable plates without special tools.
- Multiple pin positions: provides flexibility for different receiver depths.
- Interchangeable system: keep the same hitch assembly and change the display plate for other designs.
What’s included
- Left holder half
- Right holder half
- Falcons display plate with built-in ratchet feature
- Locking sleeve
- 13 mm × 68 mm 3D-printed retaining pin with threaded knob
Fitment & dimensions
- Designed for standard 2-inch receiver hitches
- Receiver sleeve: approximately 51 mm × 51 mm
- Insertion length: approximately 81 mm
- Retaining pin: 13 mm diameter × 68 mm usable span
- Approximate product weight: 146 g / 5.15 oz
Known tested fitments: 2023 Honda Pilot and 2024 Ram 1500.
Receiver dimensions, pin-hole location, bumper clearance, and receiver collars can vary by vehicle and hitch manufacturer. Please verify your receiver dimensions before ordering.
Important
This is a decorative hitch accessory only. It is not intended for towing or load-bearing use.
3D-printed products may show normal layer lines and minor surface variation from the printing process.